Liaoning straw dryer production line officially put into operation

  Recently, another straw dryer production line of our company has been put into production. The following is a live case sharing:

    Straw dryer, widely used in corn stalk drying, soybean stalk drying, cotton stalk drying, wheat stalk drying, sorghum stalk drying, wood chips drying, shavings drying, sawdust drying, ginkgo leaf drying, Mulberry leaf drying and other agricultural cellulose materials are dried. The equipment can use hot air for convection heat or steam for conduction heat exchange. The drying speed is fast, the drying intensity is high, and the residence time is short. Fully automatic control, stable and reliable operation. The coal-burning system adopts a fuzzy controller, and the temperature can be automatically adjusted to ensure the quality of the dried products. Safe production and reliable operation. The multi-stage waste heat is used in the system, and the comprehensive thermal efficiency is increased by more than 10%, which greatly reduces the drying cost.

    The straw dryer is a large-scale continuous drying equipment. The whole set of equipment consists of a coal-fired hot blast stove, an inlet and outlet equipment, a rotary drum dryer, high and low temperature pipelines, a dust removal system, a lifting conveying system, a finished product cooling system, and a finished product. Storage, electronic control system, steel frame and other equipment and institutions.

    Zhengzhou Dingli is a professional manufacturer of large-scale industrial tumble dryers. Mainly engaged in biomass dryer, slag dryer, slime dryer, etc.

 

 

Henan sprayed corn husk drying project officially put into operation

    The sprayed corn husk dryer is a by-product of the production of starch and germ after the corn is humidified. The main component is corn husk. Then spray the corn yellow syrup with high protein and energy content to greatly increase the energy, protein and amino acids contained in it. After drying, it becomes corn spray protein. Recently, the sprayed corn husk drying project built by our company for Henan customers has been officially completed. The project has been put into production. The following is a picture of the project site.

 

    The sprayed corn husk dryer is mainly composed of a heating source, a feeder, a feeder, a rotary drum, a discharger, an induced draft fan, an unloader, a power distribution cabinet and a cooling system. The project is designed and manufactured by our company for the needs of Henan customers. After the equipment is manufactured, the delivery will be arranged immediately. After the equipment arrives at the installation site, our installation team will immediately start the project installation work. At present, the equipment installation work has been successfully completed. After the test machine Officially put into production, the customer is very satisfied with the effect of material drying during the test machine, and at the same time, the working attitude of our technical team during the project installation process has also won customer praise. At present, the equipment of the project has been officially put into production, and our company will continue Provide follow-up technical support and services.

    The sprayed corn husk dryer production line equipment is one of our main product series. This equipment can quickly dry a large amount of corn husk materials into feed to meet the needs of farmers in different regions. At present, Zhengzhou Jiutian has launched according to market demand Various configurations of spray corn husk drying production line equipment, welcome to leave a message for consultation.

 

 

 

 

Merry Christmas!

 

 

Another coal slime drying project in Guizhou officially put into operation

    Recently, another slime drying project of Zhengzhou Jiutian was officially put into operation. This project is another slime drying project built by Zhengzhou Jiutian in Guizhou market. The commissioning of this project marks the successful end of our company's installation project in 2020. The following is the site diagram of the slime drying production line of the project.

 

    Zhengzhou Jiutian has built many slime drying projects in the Guizhou market. The completion of the project in the Guizhou market will play an important role in promoting the development of the company's local sales strategy. At the same time, our slime dryer will also bring convenience to customers to dry and process slime. Zhengzhou Jiutian slime dryer equipment adopts self-developed drying technology. The equipment is designed and manufactured according to customer needs, which is more suitable for customers' production needs. At present, the equipment for this project has been officially put into production. In the future, our company will continue to provide services and technical support, and interested customers will continue to pay attention.

    Zhengzhou Jiutian Coal Slurry Dryer can process hundreds to thousands of tons per day. There are many equipment specifications and models. The production line can use multiple heat sources and multi-stage dust removal devices. Welcome to leave a message for consultation and purchase.

 

Delivery: Straw drying and pelletizing production line equipment loading

    The straw dryer ordered by the customer from our company has been manufactured, and the equipment is officially shipped after loading. The following is a picture of the equipment delivery site.

    The straw dryer uses a screw conveyor to continuously add granular wet forage to the drying tube. In the transportation and dispersion of high-speed hot air flow, the moisture in the wet material is evaporated to obtain powdery or granular dry products.

    The unit includes: hot blast stove, dryer, conveyor, hay scraper, separator, baler, fan, speed control motor, operation cabinet, etc.The unit can pass the fresh forage with 60%-75% moisture content， Shreding--conveying--drying-separation-bundling (granulation, flour milling), and maintains the color, fragrance and nutrients of the fresh grass.

    The color of the grass powder after the tumble dryer is green, the smell is aromatic, It retains the color, taste and nutrient content of the fresh grass, and has a good taste, which not only enhances the appetite of livestock, but also improves economic benefits.

    Zhengzhou Jiutian Machine is a professional manufacturer of large-scale drying equipment. The company has undertaken more than one hundred large-scale drying equipment construction projects at home and abroad. The equipment is exported to dozens of countries at home and abroad. Interested customers are welcome to leave a message for consultation.

 

Another Chinese medicine residue drying project is installed

    Traditional Chinese medicine slag is the waste of pharmaceutical factories and enterprises, which is a kind of biomass waste. The traditional treatment methods of medicine residue are: discarding, landfilling, etc., but this will cause environmental pollution and waste of resources. With the enhancement of environmental protection, pharmaceutical factories currently choose to dry the waste medicine residue into pellet fuel or Organic fertilizer for resource reuse.

    The traditional Chinese medicine residue dryer is mainly composed of heat source, dispersing device, belt feeder, feeder, rotary drum, belt discharger, induced draft fan, unloader and power distribution cabinet.

 

    The working principle of the Chinese medicine residue dryer is as follows: During the drying process, the medicine residue enters the dryer and is divided into the following work areas: One is the guide area. The medicine residue enters this area and quickly evaporates water in contact with the high temperature hot air. When the guide angle's copy board is moved, it will lead to the next working area if no adhesion is formed; the second is the cleaning area, where the slag is copied by the copy board to form a material curtain state, and the material will easily form a bonding roller when it falls Wall phenomenon. In this area, because the equipment is designed with a cleaning device, the cleaning device can clean the materials adhering to the inner wall very reasonably. In this process, the cleaning device also breaks the agglomeration of the material, thereby increasing the heat exchange The area increases the drying rate; the third is the inclined lifting plate area, where the medicine slag has been in a low-moisture loose state, and the material has no adhesion phenomenon in this area. After the heat exchange, the material reaches the required moisture state. Enter the final discharging area; the fourth is the discharging area, the drum is not equipped with a

copy plate in this area, and the material rolls to the discharge port in this area to complete the entire drying

process.

Indian customer ordered a Belt Filter Press from Jiutian

 

  During the National Day holiday in October, Indian customers signed an order contract for Belt Filter Press equipment with our company. JTDT series belt dehydrator (belt filter press) is suitable for the dehydration of wheat brewed grains, distiller's grains, starch residue, bean dregs, cassava residues, coconut bran, sludge, etc. It has the advantages of continuous production, good dehydration effect, low energy consumption, low noise, and convenient operation and maintenance.

  The Belt Dehydration Machine can be widely used in the dehydration operation of high-humidity residue before drying. Through proper pretreatment, gravity dehydration and mechanical dehydration work to remove water and discharge the squeezed dehydrated material as a filter cake. It can remove about 20% of the moisture in the material, greatly reducing the burden of the dryer. Increase production capacity and reduce power consumption. Jiutian Belt Type Dewatering Equipment has been used in many projects. Our company has more than 16 years of equipment manufacturing experience. The belt dehydrator has a variety of specifications and models and supports customization. If you are interested in the belt dehydrator, please leave a message or consult online.

 

The installation of Jiangsu liquor lees dryer equipment is completed

    Zhengzhou Dingli’s distilled grain drying project, which is co-operating with Jiangsu customers, has come to an end. The project is expected to be completed within the specified construction period with the close cooperation of Zhengzhou Dingli’s installation team and local customers.

    This project is another drying project constructed by our company in Jiangsu. After the equipment arrived at the installation site, our installation team immediately launched related work. According to the work plan, we paid attention to the details of the project at the installation site to ensure the quality of the project. At the same time, we are trying to make the liquor lees drying project for customers as early as possible. At present, the main equipment has been installed and the follow-up work continues. The professional attitude of our staff during the installation process has also won the praise of customers. The installation of the project is currently in progress. The editor will continue to report on the follow-up progress of the project, and interested customers will continue to pay attention.

    Zhengzhou Dingli distiller’s lees dryer is suitable for beer lees, white distiller’s lees, rice distiller’s lees, alcohol lees, etc. Zhengzhou Dingli can design and manufacture equipment according to customer needs, and provide services such as the construction of distiller’s lees drying projects. Welcome everyone to leave a message and consult the distiller’s dried grains dryer. equipment.

 

 

Delivery site of Italian pomace tumble dryer equipment

 

    At the end of September, the pomace tumble dryer equipment provided by our company for Italian customers was officially completed. After the precision inspection by the quality inspection department, the equipment was officially shipped out of the factory. The following is a picture of the Italian pomace tumble dryer delivery site.

    Zhengzhou Dingli is a large-scale high-humidity material dehydration drying equipment manufacturer, which can provide domestic and foreign customers with high-quality equipment and project construction services. This time, the pomace drying project in cooperation with our company and Italian customers has been completed. The follow-up services of the project will be launched after the equipment arrives and installed. The pomace dryer of this project is designed and manufactured by our company in strict accordance with the contract and in accordance with the customer's processing capacity demand, moisture demand, and heat source dust removal accessories. The equipment is used The drying process independently developed by our company and the detailed equipment will bring convenience to the local processing of pomace and other materials after being put into production. The follow-up progress of the project will continue to be learned on the Zhengzhou Dingli website.

 

    Zhengzhou Dingli not only provides pomace dryer equipment, Dingli high-humidity material drying equipment is suitable for medicine residue, distiller’s grains, potato residue, starch residue, bean dregs, bacteria residue and other materials. There are many equipment specifications and models. Welcome to leave a message for consultation .

 

Sichuan food waste treatment equipment was officially completed

    In summer, many installation teams of Zhengzhou Dingli continue to work on the front line of the project. Recently, with the cooperation of the Dingli installation technical team and local customers, the Sichuan project has officially completed the finishing work. The equipment of the project will be tested in the near future, and soon after the test is completed Put into production, the following is the site map of Sichuan food waste treatment equipment.

 

    The environmental protection of kitchen waste has always been a topic of concern to everyone. Zhengzhou Dingli has launched a variety of kitchen waste treatment production line equipment according to market demand. After the customer in Sichuan put forward the demand, our company immediately designed and formulated the production line plan. The equipment of this project It is made by our company in response to customer needs. During the equipment installation process, our installation team closely cooperates with local customers, pays attention to project details and other issues, grasps quality and keeps pace with progress, and creates a high-quality kitchen waste treatment equipment project for customers. Currently this project The finishing touches have been completed and the customers are quite satisfied.

 

    Zhengzhou Dingli is a manufacturer of kitchen waste treatment equipment. It has more than ten years of project construction experience. Currently, it has built kitchen waste drying treatment projects in many areas. Dingli large-scale kitchen waste treatment equipment can quickly dispose of kitchen waste. The equipment has high efficiency, welcome customers in need to come to the factory to buy

 

 

Dingli insect drying production line equipment sent to Malaysia

    After the insect drying production line equipment ordered by our Malaysian customers is completed, our company will immediately arrange the equipment delivery. The following is the equipment delivery site.

 

 

    This morning, the workers in our workshop carried out the equipment loading work. During the equipment loading process, our staff paid attention to details and carefully checked the equipment list to ensure that the main equipment and accessories were complete. After the equipment loading work was completed, the equipment list was checked again Make sure that there is no omission of formal delivery.

 

    The insect drying production line equipment of this project is designed and manufactured by our company according to the needs of customers. This equipment can quickly dry the materials into high-protein feed, etc. At present, the equipment has been officially sent to Malaysia, and the insect drying equipment will be installed later. You can log on to the Zhengzhou Dingli website to learn about the progress of debugging.